Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Roval Terra CLX Evo 700c Wheelset
$2,500.00
Where in the world can you ride these brutes? Anywhere you damn well please. Road light, off-road tough, smooth as butter, Terra CLX EVO wheels bring leading-edge performance to the diverse needs of aggressive gravel rides. Available in 700c and 650B with 30mm internal-width rims to deliver optimal handling with up to 2.1" tires, so you’re the master of any terrain. Durability delivered through unsurpassed toughness-to-weight, thanks to leading composite technology rims. Lifetime warranty and no-fault crash replacement. - Rim Type: Carbon Clincher, tubeless-first - Rim Material: Advanced Carbon Composite - Rim Width (internal): 30mm - Rim Depth: 25.3mm - Front Spoke Pattern: Radial/Two-cross (2:1) - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: Front/Rear: 24/24 - Spoke Type: DT Swiss Aerolite T-head - Nipple Type: DT Swiss Pro Lock Alloy hexagonal - Spoke Length (front): 700c Right/Left: 283mm/279mm - Spoke Length (rear): 700c Drive-Side/Non-Drive: 278mm/284mm - Front Hub: Roval AFD1, Center Lock, 12mm thru-axle end cap - Rear Hub: Roval AFD2, Center Lock, DT Swiss EXP internals, Shimano or SRAM XDR, 142x12mm thru-axle end cap - Assembly Method: Handbuilt - Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed) - Weight (with rim tape and tubeless valves): 700c: 1357g
DT Swiss ARC 1100 Dicut 62 Disc
$1,330.00 - $1,843.00
Aero meets All-around: The ARC 1100 DICUT 62 is ridden by DT athletes in long distance triathlons, as well as in flat stages of the Tour de France. Adding to it's versatility is the Aero+ concept: It is the category leader when it comes to low drag numbers but at the same time it is easy to handle in every wind situation. Hubs equipped with SINC ceramic bearings and ultra-lightweight components throughout are there to make you roll smooth and fast, no matter if you're fighting against the wind on your time trial bike or trying to escape the bunch on the final meters to the line.
DT Swiss ERC 1100 Dicut 47
$1,330.00 - $1,843.00
Whatever road you choose, the ERC 1100 DICUT delivers the best performance. The benchmark Aero+ concept developed with DT's partner SWISS SIDE generates maximum speed and unparalleled handling characteristics. The guts of this outstanding wheel are its innovative components, being assembled with regard on every small detail. These wheels leave you with no excuses and give you even more reasons to get out and ride — wherever the road may take you.
DT Swiss XMC 1200 Spline 30
$1,224.00 - $1,672.00
The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheel set.
DT Swiss XRC 1200 Spline 25
$1,185.00 - $1,633.00
The new standard in modern day, high performance cross ccountry wheel sets. Coming with a generous 25mm wide hookless full carbon and tubeless-ready rim, the XRC 1200 SPLINE 25 strikes the perfect balance between low weight and aggressive riding readiness. The lean, CNC machined hubs are super-light while the 25mm tall rim has the inherent stiffness necessary for efficient riding and to precisely hold a line. Together with the renowned DT Swiss build quality, this wheel is what everyone looking to go fast up and down has been waiting for.
Santa Cruz Reserve 30 29-inch Wheelset
$1,599.00
Five years ago, Santa Cruz debunked every skeptic's fear about the long-term durability of carbon fiber bicycle frames. Now they are doing the same for wheels. Santa Cruz Reserve wheels are built on the highest quality carbon rims on the market. Their confidence in the design and strength of the wheels is backed up by a lifetime warranty, just like Santa Cruz frames.
DT Swiss ERC 1400 Spline 47
$1,092.00 - $1,514.00
Our benchmark setting Aero+ rim matched to a punchy mix of top end aerolite and laced to premium Ratchet System hubs makes for a wheel that delivers in all riding situations. Fitting 28 mm tires on its wide rims will give you all the comfort and grip needed for extended rides on mixed surfaces. At the same time, in combination with 25 mm rubber, the ERC 1400 SPLINE with will aero optimize your race bike, ready for you to set your own, new benchmarks.
DT Swiss PRC 1400 Spline 35 Disc
$1,092.00 - $1,514.00
Unsure what will happen on your group ride? Mountains, hills, or flats? Water from below, water from above? You needn't worry, the PRC 1400 SPLINE 35 has it covered. High-end, bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, these wide and stiff full carbon rims accelerate with the best of them.
Roval CLX 32 Disc Wheels
$1,399.95
The Roval CLX 32 Disc full-carbon clincher is the perfect performance disc wheel; light, stiff, and fast. The wide internal rim width provides an optimum tire profile for precise handling, stiffness, and aerodynamics. The Center Lock hub makes this an ideal wheel for the muddiest cross-race or fast paced ride. This wheel offers a non-SCS rear hub for traditional QR or 12mm thru-axle compatibility.
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,350.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps
Zipp 303 NSW Carbon Clincher Wheel
$1,150.00 - $1,350.00
Built on the foundation laid by Firecrest, offering unrivaled crosswind stability and the most aerodynamically efficient rim design on the market, the 303 NSW takes it all to the next level. Like its siblings, 404 NSW and 808 NSW, Zipp's top engineers in The Nest advanced development lab incorporated improved aerodynamics, industry leading braking performance, and reduced rolling friction to produce the lightest, highest-performance 303 wheelset Zipp has ever made. Light enough to fly up climbs, tough enough to excel in the cobbled classics, and with the industry's best available braking performance for the most technical descents, the 45mm deep 303 NSW is built for a singular purpose: To be fast, everywhere. But the 303 NSW is no "race day only" wheelset to be tucked away in a wheel bag until a race number is pinned to the rider's jersey. It's built to take the abuse of everyday training rides. Zipp has achieved this reliability at a lighter weight with a revised carbon fiber layup developed through testing on the famed cobbles of the Forest of Arenberg with the world's fastest riders. Because the toughest roads often experience the toughest weather conditions, they've included Zipp's Showstopper brake track for braking performance that delivers the best modulation and shortest stopping distances in wet and dry conditions. And they've improved aerodynamics with their ABLC Sawtooth technology and Impress graphics to produce a rim that is as fast as it is stealthy. At the center of the 303 NSW wheelset is the Cognition hubset. Built to provide the lowest rolling friction possible without compromising sealing, the hub's Swiss-made bearings work in tandem with Zipp's Axial Clutch technology to dramatically cut rolling friction when compared with conventional freehub systems. Bottom line: Cognition hubs make the 303 NSW fast, even when you aren't pedaling. All of these technologies combine to build a wheelset that only NSW technology can produce, a wheelset with unrivaled performance. Wherever the road may take you, get there faster on Zipp 303 NSW wheels.
Zipp 404 Firecrest Carbon Clincher Rim-Brake Rear Wheel
$1,200.00
If you had to choose just one wheel, the 404 Firecrest Carbon Clincher should be your choice. With the depth and shape proven in all conditions, it’s the all-around performer and the standard by which all other wheels are measured. Its 58mm rim depth is a classic that has carried athletes to victory in every kind of event and situation – every triathlon distance, breakaways, field sprints, and hilly finishes. At the center of the 404 Firecrest is Zipp’s 77/177 hubset with best-in-class durability, bearing protection with no pre-load adjustment needed. The result is improved braking (Showstopper), aero performance, stiffness, durability, simplicity, and versatility. - New, faster, more stable rim profile - AeroBalance - ABLC SawTooth dimples pattern - Showstopper brake track - 10- or 11- speed compatible - XDR option - Handcrafted in the USA
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 700c Front
$1,150.00
The 303 brings a lot to the table, including heritage proven in the world's hardest races. At the center of the wheelset is Zipp's 77/177 hubset, which results in improved stiffness, durability, simplicity and versatility. The carbon wheel that helped pioneer the Firecrest rim platform for improved aerodynamics and crosswind stability also features the unspoken durability that has repeatedly won Paris Roubaix and the Tour of Flanders - Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance - Each wheel includes Zipp quick release skewer, end caps that can be swapped to run 12mm or 15mm thru axle; 1 Zipp 700c X 20mm rim tape, and 1 Zipp tubeless valve - 303 Firecrest Carbon Clincher Tubeless Disc Brake total wheelset weight is 1645 grams
Zipp 404 Firecrest Carbon Clincher 77 Rim-Brake Front Wheel
$1,000.00
If you had to choose just one wheel, the 404 Firecrest should be your choice. With the depth and shape proven in all conditions, it’s the all-around performer and the standard by which all other wheels are measured. Its 58mm rim depth is a classic all-around performer that has carried athletes to victory in every kind of event and situation – every triathlon distance, breakaways, field sprints, and hilly finishes. At the center of the 404 Firecrest is Zipp’s 77/177 hubset with best-in-class durability and improved bearing protection with no pre-load adjustment needed. The result is improved stiffness, durability, simplicity, and versatility. - Firecrest rim Technology provides world-class handling and stability - 77/177 hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed - Aero performance, durable and Light Weight - ISO 4210 compliant. See Declaration of Conformity for details
DT Swiss XM 1501 Spline ONE 35
$605.00 - $802.00
Fat bikes have opened the eyes to many riders regarding where and how bicycles can be ridden. The XM 1501 SPLINE 35 carries the genes of fat in a lightweight trail package. It is the perfect fit for 2.6-inch tires. Fit to a modern trail bike, it opens up unknown possibilities: That slippery off-camber root section all of a sudden is looking a lot less intimidating. With our industry leading material and manufacturing know-how DT made sure that this wheel, despite it's built-in rowdiness, comes to you in a lightweight and durable package, ready for many all-mountain adventures.
DT Swiss XM 1501 Spline ONE 30
$565.00 - $776.00
The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires it will eat up the roughest of descents you can throw at it, and it will climb to those trailheads with ease. Really the perfect size for demanding all mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.
DT Swiss PR 1400 Dicut OXIC 21
$552.00 - $763.00
The pinnacle of aluminium road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness-to-weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character. Finally, at just 1435g, this wheelset is both extremely practical and competitive, very much in tune with its stealthy appearance.
DT Swiss EX 1501 Spline ONE 25
$539.00 - $750.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
DT Swiss XR 1501 Spline ONE 25
$552.00 - $750.00
Responding to the demand from top racers for even wider rims, DT have developed an XC-specific 25mm-wide rim profile. This is what's built into the XR 1501 SPLINE ONE 25. The result is a super capable, super light Cross Country wheel. It feels perfectly at home on the trails that have become tougher and rougher both up and down the mountain. And built with DT Swiss quality in every detail, from the hub internals to the spoke nipple, it makes sure you complete all the laps, weekend after weekend.
DT Swiss XR 1501 Spline ONE 22.5
$526.00 - $737.00
The new 22.5mm-wide Cross Country specific XR 1501 SPLINE ONE comes with all the advancements of a modern cross country rim, only at 2.5mm more width, providing more air volume for the same size tire which creates more traction and comfort. The asymmetric rim further improves spoke angles, making the wheel even stiffer, more precise handling, and more responsive. The specially developed process for surface hardening and the gentle anodizing result in an unsurpassed surface durability at no additional weight.
DT Swiss ER 1400 Spline 21
$473.00 - $644.00
Nowadays, road riding is much more than riding on a road. Gravel, bad choppy roads, fenders, lights, disc brakes, and even racks have broadened our horizon. The ER 1400 SPLINE is your premium alloy choice if you continued reading after the word "rack". Coming with a 20mm wide, super-light and resilient rim, as well as a hub based on the classic 240s, it is just what you need when your rides lead into the unknown and there are still the occasional bragging rights to be defended.
DT Swiss XM 1501 Spline ONE 40
$631.00
Firmly standing in the plus category, the XM 1501 SPLINE ONE 40 enables these bikes to show their full potential when matched to the right plus size tire. Set up tubeless, such a bike has most of the possibilities of a fat bike while being light enough to be ridden very, very dynamically. DT's rim profiles, wheel build, and hub technology are so elaborate, they will easily stand up to all the abuse such a plus bike is capable of.
DT Swiss HX 1501 Spline ONE 30 Front Wheel
$611.00
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
DT Swiss M 1700 Spline 35
$387.00 - $546.00
For riders looking for more — more grip, more capability — the M 1700 SPLINE 35 is the right choice. Wearing some plus size tires, this wheelset will carry you far into all mountain terrain. Offering an almost unbeatable ratio of affordability, high-end components, and build, it is the workingman's wheel. Its simple and durable straight-pull construction with DT's high precision Ratchet System hubs make it so reliable and easy to use, that all that's left for you is to focus on the ride and think about the next adventure.
DT Swiss CR 1600 Spline 23
$328.00 - $434.00
What feels better than passing a mountain biker on the trail while gripping the hoods of your cross bike? Not much, but the CR 1600 SPLINE offers more than that. Whether you are cutting through mud, dancing on icy, frozen trails, or exploring dusty desert roads, you will feel the great efficiency of these wheels. Wide straight-pull spokes attached to a beautifully machined, high end Ratchet System hub will keep encouraging you to attack new challenges as soon as the last one is over, and the CR 1600 SPLINE is totally up to it.
DT Swiss ER 1600 Spline 23
$328.00 - $434.00
Featuring a lightweight rim and strong bladed spokes, it's a wheel that marries good climbing abilities with a precision ride. This is the idea behind the ER 1600 SPLINE 23: Building a wheel able to perform anywhere, and to perform well. The wide rim and superb Ratchet System hub bring traction and reliability into the mix — it's perfect for riding all year, on all roads, and on mixed terrain.
DT Swiss ER 1600 Spline 32
$328.00 - $434.00
Riders known for being hard on their wheels, for not avoiding potholes, and for out sprinting people in full pro kit while on their way to do the groceries should take a close look at the ER 1600 SPLINE 32. A high-end welded alloy rim with a huge cross section laced to wide aero spokes leave you with nothing left to desire. And don't be fooled by the classy looks and a silky smooth Ratchet System hub, because the ER 1600 SPLINE 32 really is all about hard riding and reacting to power coming from the strongest of calves.
DT Swiss M 1700 Spline 30 Front Wheel
$361.00 - $374.00
Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?
DT Swiss T 1800 Classic 32
$368.00
With the T 1800 CLASSIC track style is taken to the streets. From the wide, medium profile alloy rim to the extra flat bladed spokes it oozes muscles. And that muscle is needed when zipping around cars and corners at full pace. Its simplicity comes from Swiss engineering know-how, ensuring a long, trouble free life navigating city roads and procuring big grins on riders faces. That said, it doesn't mean it can't go fast on an oval, because it can.
DT Swiss M 1700 Spline 25 Front Wheel
$348.00 - $361.00
Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.
DT Swiss 350 MTB 6-Bolt Rear Hub
$230.00 - $252.90
DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors
Campagnolo Record Rear Freehub (32-hole)
$177.00
Campagnolo's Record hub is loved all over the world for its pro-level quality, super-smooth bearings and excellent durability. It features an oversize shell for premium stiffness and it's built with cold-forged aluminum to maximize strength and minimize weight. Plus, you can easily adjust the bearing preload with a simple turn of an Allen wrench — even while the wheel is still on your bike.
Muc-Off No Puncture Hassle Tubeless Sealant
$39.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
Zipp Cognition Freehub Kit
$116.30 - $142.00
Freehub bodies for Zipp Cognition hubs.
Sun Ringle Duroc 40 Rim
$129.99
Product specs: - Str tubeless ready - Size: 27.5", 29" - Outside width: 40mm - Inner bead width: 36mm - Weight: 27.5"-515g, 29"-550g - Double wall welded rim (sleeved rims available oem only) - Brake compatibility: disc only - Hole count: 28/32
Quality Wheels Shimano Tiagra RS400 / Alex DA22 700c Rear
$115.00 - $125.00
Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.
Quality Wheels Shimano Deore M610 / Alex DH19 700c Rear
$119.00
Similar to the stock wheel for Surly's Long Haul Trucker.
DT Swiss Competition 14/15/14g (Silver) Spoke
$71.99 - $111.00
- Double butted 2.0/1.8/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 192g @ 32h/265mm - Box of 100 - Nipples sold separately
Quality Wheels Track Front Wheel Formula Cartridge / Alex DA22 700c Front
$110.00
Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices. - Cartridge bearing hub with solid axle
Quality Wheels Shimano Tiagra RS400 / Alex DA22 700c Front
$100.00 - $105.00
Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.
WTB TCS Rim Tape
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Quality Wheels Shimano TX505 / Alex DC19 26-inch Front
$79.00
If you need just one wheel for on-the-spot repairs, this wheel features both rim brake and disc brake compatibility.
Stan's NoTubes 3.30 Shimano/SRAM Freehub Body (9/10-speed)
$74.00
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
SRAM 9/10 Speed Freehub Body for 746 Rear Hub
$70.00
- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Right Axle End Cap
Robert Axle Project Kid Trailer Thru Axle
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Quality Wheels Formula 130mm Freewheel / Alex Y2000 700c Rear
$55.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.
Sta-Tru 18-inch Front Wheel
$50.00
Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 18-inch - ISO Diameter: 355 / 18-inch BMX - Front Axle: 3/8-inch x 100mm - Tire Type: Clincher
Sta-Tru 700c Front Wheel
$49.49
Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Tire Type: Clincher
Whisky Parts Co. Tubeless Rim Tape
$8.00 - $40.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
Wheels Manufacturing Inc. Axle-20
$36.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many tandem hubs - Type: Solid Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 187mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-04
$35.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 146mm - 1 axle per bag
Ritchey WCS Zeta Disc Front Hub Conversion Kit
$29.95
Ritchey Front Hub Conversion Kits
Stan's NoTubes Neo Bearing Kit
$12.50 - $29.00
Replacement bearings for Stan's NoTubes Neo hubs. Includes 2 bearings. - 26mm OD x 15mm ID - 7mm thick
SRAM MTH 716 Conversion Caps
$26.00
These MTH 716 Conversion Caps allow your SRAM MTH 716 front hub to accept a 15 x 100mm thru-axle.
Stan's NoTubes Rim Tape
$15.50 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Alloy Tubeless Valve Stems
$23.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Stan's NoTubes Tubeless Valve Stems
$7.68 - $16.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
WTB TCS Brass 46mm Valve Stems
$15.95
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
Sunlite Quick Release Skewer (Front, 100mm)
$10.00
- Replacement steel quick release skewers
Sunlite Replacement QR Skewer
$10.00
- Replacement rear skewer - Spacing: 135mm - Material: Steel
Page 1 of 2 Next page