Filter By:
- Bar Ends (2)
- BMX (3)
- Bottom Brackets (40)
- Brakes/Levers/Pads (66)
- Cables (20)
- Cassettes/Freewheels (45)
- Chainrings (35)
- Chains (41)
- Show More Categories
- Cranksets (15)
- Derailleurs (28)
- Forks (1)
- Groups (1)
- Handlebar Grips/Tape (23)
- Handlebars (10)
- Headsets (17)
- Pedals (36)
- Saddles (28)
- Seatposts (6)
- Shift/Brake Combinations (8)
- Shifters (15)
- Stems (16)
- Other (113)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$25.00
- Durable cold forged CNC machined freewheel
- 3 pawl engagement for stronger hold with engagement every 12 degrees
- New removal notch pattern allows for better frame clearance
$55.00
612 Track rings are the perfect compliment to any 144mm B.C.D. crankset. They are made from 7000 series aluminum and feature a lovely and durable anodized finish.
- BCD: 144
- Chain Compatibility: 1/2-inch x 1/8-inch
$18.00 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$25.00 - $33.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.00 - $38.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$61.00
With gobs of beautifully modulated power and intuitive easy-to-use adjustability, the BB7s set the standard in the realm of mechanical disc brakes. Inboard and outboard adjustor knobs, Tri-Align Caliper Positioning System, and integrated cable stop spring tension adjustment ensures that our standard is everyone else's goal.
- Mechanical simplicity
- Adjustability
$31.99 - $37.99
- Cold-forged chromoly construction
- 8 splines for removal
- Oversize 3-pawl design
- Heavy-duty use freewheel
- 13T and 14T fit Flip-Flop hubs only
- Speeds: Single
- Width: 3/32"
$27.00 - $55.00
- Adapters press directly into specific PF30, BB30, BB86 or BBright frames and allow the use of standard Ultra-Torque (UT) crank sets and EPS components
- Updated design increases surface area contact with the frame's bottom bracket, reducing the possibility of noise from frames with slight imperfections
- Ultra-Torque OS Fit BB-cup tool is required for adapter installation
$30.00
Campagnolo's Record Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread.
• Italian: 70mm
• English: 68mm
$33.95 - $40.45
Campagnolo ProTech bottom brackets feature a patented external sealing ring design that protects a strong, resilient fiberglass-charged polyamide central tube from the harmful ingress of water, mud and grit.
- Designed specifically for gravel riding and racing to protect against water, mud & grit
$35.00
Campagnolo's Super Record Ultra-Torque Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread.
• Italian: 70mm
• English: 68mm
$41.45 - $54.95
2-piece center lock rotors for use with Campagnolo hydraulic brake systems.
- Rounded external edge prevents cutting of skin in case of contact with rotor
- Inner aluminum spider maximizes heat dissipation
- EKAR rotors are strong 1.85mm thick stainless tempered steel
- Strong, durable, light & resistant to corrosion
Specifications:
- Rotor Type: Two Piece
- Hub/Disc Compatibility: Center-Lock Disc
- Pad Compatibility: All Pad Compounds
$43.00
Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions.
- Chrome-Nickel-PTFE finish
- Designed specifically for use with Campagnolo 8 and 9 speed drivetrains only
- Links (links): 114
- Color: Silver
- Width: 6.8 mm
- Drivetrain Speeds: 9
- Chain Connection Type: Pressed Pin
- Half Link Chain: No
- Weight: 300 grams
$47.00
Ultra-Link Chains designed to maximize performance with Campagnolo drivetrains, while increasing durability and power transmission.
- Delivers extremely high performance levels and durability over time
- Design is optimized to perform with teeth on sprockets and crowns of Chorus drivetrain components
- Solid pins are aligned with the external surface for smoothness and precision
- 5.15mm width is designed to produce faster and lighter shifting
Specifications:
- Links: 110
- Chain Connection Type: Pressed Pin
- Half Link Chain: No
- Drivetrain Speeds: 12
- Weight: 241g
$61.00
New Super Record 12 Speed chain: slim, robust, smooth and precise.
The chain, in all its apparent simplicity, plays a critical role in the cyclist's safety and in optimizing the entire transmission mechanism. The new Super Record 12 Speed chain also had to be redesigned from scratch to work with all the other new transmission components. Therefore, the first and most important objective was reducing its overall dimensions. Its width is now 5.15 millimeters, thanks to the new pins which are perfectly aligned with the links’ outer surfaces.
The second objective was safeguarding its performance. This was achieved thanks to the Ultra-link system that makes the chain safe and durable, and a special treatment that guarantees extreme smoothness and precision shifting.
$66.00
Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions.
- Hollow pins for reduced weight
- NI-PTFE antifriction treatment reduces friction for smooth pedaling, reduced noise, greater efficiency and longer chain life
- Links (links): 114
- Width: 5.9 mm
- Drivetrain Speeds: 10
- Chain Connection Type: Pressed Pin
- Half Link Chain: No
- Weight: 255 grams
$179.45 - $205.00
Steel sprockets with nickel-chromed finish. Built with one triplet and 8 single sprockets.
- Includes lockring
- 11-32t compatible only with medium-cage rear derailleur
- Cassette Body Type: Campagnolo 10/11 Speed
- Weight: 249g
$180.00
The Campagnolo Chorus 12-speed rear derailleur features 3D Embrace technology and 12-tooth pulley wheels making it suitable for all cassettes as the distance stays optimum on each individual sprocket, regardless of the cassette selected.
- Embrace technology not only keeps the rear derailleur vertically aligned in the perfect position for each sprocket, it now makes the upper pulley wheel advance perfectly in the direction the bike is advancing
- On rough roads, the spring positioned between the upper body and the pivot absorbs the vibrations, ensuring the chain always rests properly on the sprockets
- The pulley wheels on the 12-tooth derailleur cage allow the chain to move more smoothly
- The initial position of the rear derailleur can be adjusted to suit any cassette.
- The rear derailleur is positioned further back, making it easier to slide the wheel out and replace it
- Upper and lower body crafted from technopolymer that is reinforced with long carbon fiber for exceptional durability
Specifications:
- Largest Cog: 34
- Rear Derailleur Mount Type: 10x1 Standard
- Chain Wrap Capacity (teeth): 37
- Cage Length: Medium
- Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+
- Drivetrain Speeds: 12
- Weight: 240g
$210.00
The Campagnolo Chorus cassette offers cyclists even more versatility and greater choice and autonomy in terms of available gears.
- Designed as the same width as 11-speed cassettes to maximize compatibility with wheels and frames
- The two bigger sets of three in a single-block piece eliminate energy dispersion
- Surface treatment increases durability and smoothness
- Cassette Body Type: Campagnolo 10/11/12 Speed
- Drivetrain Speeds: 12
- Color: Silver
- Defined Color: Silver
$300.00
The design of the four arm carbon fiber cranksets that so well identify the Super Record, Record and Chorus groupsets has also found its way into the fantastic Campagnolo Potenza 11 drivetrain, albeit in an aluminum construction. The Potenza crankset is made with both left and right crank arms in hollow forged aluminum to keep weight to a minimum while maintaining the same performance characteristics of its carbon fiber counterparts. Potenza’s four arm spider design makes for one single crankarm for all chainring options thanks to its unified bolt pattern which allows for all three chainring standards 53/39, 52/36 and 50/34 to be built upon the same crankset. Changing between compact and standard with the Potenza groupset is as easy as changing eight bolts and two chainrings. While the 4-arm bolt pattern offers advantages in terms of practicality, the Campy Tech Lab designed it primarily with performance characteristics in mind. The eight bolt pattern with a spider arm design that not only holds the chainring in place by way of the bolt but also supports the chainring and in doing so, increases system rigidity to the point of surpassing its direct competitors in laboratory tests.
-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings
-Power-Torque system have drive-side bearing pre-installed. The non-drive bearing comes pre-installed in the bottom bracket cup
-Power-Torque Plus system utilizes a self extracting crank bolt for easy disassembly
-Requires use of Power-Torque bottom bracket cups
-Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain
-Power-Torque system uses a single piece axle fixed to the drive-side crank arm which allows for simplicity and a light weight and rigid axle
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$10.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Durable steel construction
$10.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$12.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Lightweight aluminum construction
$15.99
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values.
- Bearings not included
$23.00
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 12 mm
• S.H.I.S Lower: EC34
• S.H.I.S Upper: EC34
• S.H.I.S. Stem Clamp Diameter: 28.6-26tpi Quill
• Upper Stack Height: 22 mm
• Weight: 205 g
$29.99 - $35.99
With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind.
- 7075 Aluminum thread ring
- 7075 Aluminum preload spacer adjuster
- Grade 5 Titanium 2.5mm hex fastening bolt
- Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles
$36.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS42/28.6/H9/K|IS42/30/H1
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 42.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 72g
$36.00 - $39.99
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
$44.99
This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
$74.00
$84.99
13% Off
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6|EC44/40
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.0mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.0mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
$78.00
$78.99
1% Off
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 109g
$124.99 - $125.99
The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance.
- 440C stainless steel bearings, dual lip seal, marine grease
- Machined aluminum cups
$379.00 - $459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for.
With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency.
The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed Bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product.
You have two bearing choices. The first choice is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag.
Compatible with:
- Frame: BB86
- Opening diameter: 41mm
- Shell width: 86.5mm
In the box:
- 2 CeramicSpeed Bearings
- 2x dust covers
- Plast-sheet
- 4 x 1mm spacers
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker Sheet
$479.00
BSA is equivalent to English threading. English threading on road bikes mean a 68mm-wide, 34mm inside diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, such as Shimano, FSA, Rotor, and others.
Choose between two bearings for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag.
English threading is easy to work with, and 24mm spindles easily fit through the shell, allowing for large bearings to be employed in the outside cups.
Put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings.
In The Box:
- 2 threaded cups with bearings
- 2 dust covers with built-in spacers
- Spacer tube
- 10mm syringe of All Round Grease
- Sticker sheet
$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs
$26.99
Cleats with a more forgiving 10-deg release.
- Optimized for novice riders or those new to clip-in pedals
- 10-deg release angle makes it easier to unclip
- 2-hole bolt pattern for mountain bike shoes
- Plastic spacing shims included
- Compatible with all Crankbrothers clip-in pedals
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
- SPD compatibility
- Weight (pair): 30g
- Float: 6 degrees
- Release angle: 15 or 20 degrees
$26.99
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability.
- Weight (pair): 30 grams
- Shoe compatibility: SPD
- Release angle: 15 degrees
$6.99
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 15.4mm, for ratchet
$50.00
Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control.
- Allows for easy installation on Rock Shox Torque Cap compatible forks
$44.99
- Clamps to a threadless steerer
- Offers up to 4-1/2" stem height increase
- Forged 6061-aluminum provides extra strength
- Machined aluminum top cap is threaded, providing easy installation
$6.99 - $7.99
Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility.
- Steel with chrome finish
- Cogs are splined for Shimano BMX and singlespeed hub compatibility
- Compatible with 1/2-inch and 1/8-inch chains
$7.99
Dimension Nylon Basic Toe Straps
-Durable metal buckle
-Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
- 450mm
$10.95
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 440mm length
$16.99 - $46.99
Dimension Chainrings.
- No ramps, pins, or shift aids
$18.99 - $64.85
Dimension Multi Speed Chainrings.
- CNC-machined AL-7075
- Has ramps and pins to aid in shifting (not on 74mm BCD inner chainring)
- Same BCD as Surly Long Haul Trucker, Cross-Check, and Troll complete bikes (74mm & 110mm)
$21.95
Dimension Stub bar ends.
- Color: Black
- Length: 95mm
- Material: 1-piece forged
- Weight: 111g
$24.99 - $28.00
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- 0mm offset
$25.99
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards.
- Shot-peened finish
- 6061-T6 Aluminum
- 9-deg backsweep
- 720mm wide
- 35mm rise
$26.39
Dimension Stem Column Adaptors
- Total quill length 180mm
- Measurement from minimum insertion to top of steerer adaptor is 118mm
- Alloy
- Quill insertion diameter: 1-inch
$29.99 - $36.99
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp.
- 2-D forged AL-6061-T6
- Four-bolt handlebar clamp
- 41mm height
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
- Weight: 130g-180g
$30.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors.
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 475g
$39.99 - $59.99
Dimension Freewheels are excellent drivetrain component replacements. With smooth shifting performance and durable construction, they'll help breathe new life into older bikes.
- A must-have in any bicycle service department
- One-piece design
- Shimano index compatible
- Works with most friction shifters
- Suitable for use with e-bike drivetrains
$39.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
$265.00
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping.
- Material: Carbon Fiber
- Faceplate Material: Aluminum
- Hardware Material: Titanium
- Stack Height: 41mm
- Torque Spec, Face Plate: 5.5Nm
- Torque Spec, Steer Tube: 5.5Nm
- Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
$25.00
A perfect complement to your ENVE cockpit and fork. The ENVE compression plug keeps your ride straight as an arrow and looking good.
$40.00
$40.00 - $44.99
Up to 11% Off
Features and Benefits
- 250cm in Length—accommodates bars up to 50cm
- Grip compound maintains traction when wet
- Durable stretch for installation
- Vibration-damping backer strip
- Hard-wearing construction
- 3mm thick
What It Is
ENVE-designed bar tape that provides maximum ride feel without compromising comfort and ensures grip in wet conditions. 250cm in length, 3mm thick, and silicone-backed compound that provides the right amount of stretch for ease of installation and durability.
Science & Insight
For ENVE, handlebar tape is more than a fashion accessory; it is a key component that sets the tone for your ride. Bar tape that becomes slippery when wet and causes discomfort diminishes confidence and the ride experience. As such, ENVE Handlebar Tape is designed with a grip compound that ensures bare-handed traction despite wet conditions. To maximize ride feel without compromising comfort, ENVE Handlebar Tape is 3 millimeters thick with a vibration-damping silicone backer strip that ensures comfort for long miles over rough roads.
Page 1 of 10
Next page